How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1637
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have used VIN and engine ID number but cannot get the

Customer Question

I have used VIN and engine ID number but cannot get the right rear main seal. The one they gave us and said is correct is 5in ID but the rear of this crank is 5.5 in Dia. It is manufactured in mid 92. what gives? how do I locate this seal?
Submitted: 6 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 6 months ago.

Hi my name is***** will try to help. What is the complete model, serial number and CPL from your engine tag? Also what is the part number they sold you?

Customer: replied 6 months ago.
model B5.9 190 engine # ***** CPL 1261 sold me part #3934486 There is also a RET # *****
Customer: replied 6 months ago.
This crank has a center that protrudes out about 2.5 to 3 inches
Customer: replied 6 months ago.
please cancel this request as the answer I asked for does not exsist. I have discovered the modification
Expert:  Daniel Wilson replied 6 months ago.

Will do.

Related Medium and Heavy Trucks Questions