How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1637
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a cat 246 that will not start : Was using it earlier

Customer Question

I have a cat 246 that will not start
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: Was using it earlier and the oil pressure light came on I lost all controls excluding clam function turn off machine to inspect and will not start again
JA: Is there anything else important you think the Heavy Equipment Mechanic should know?
Customer: The oil light is still on....
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 6 months ago.
Category: Medium and Heavy Trucks
Expert:  Bradley Martin replied 6 months ago.

Do you know where the oil pressure sending unit is? Have you checked the connection?

Expert:  Bradley Martin replied 6 months ago.

Also what is your serial number so I can pull up your service manual?

Related Medium and Heavy Trucks Questions