How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask William Herren Your Own Question
William Herren
William Herren, OWNER
Category: Medium and Heavy Trucks
Satisfied Customers: 26
Experience:  Mechanic at HERREN INDUSTRIAL GROUP
Type Your Medium and Heavy Trucks Question Here...
William Herren is online now
A new question is answered every 9 seconds

My international won't crank up with out spraying starting

Customer Question

My international won't crank up with out spraying starting fluid. Had the injection harness and injectors, idm,ipr replaced crank and cam shaft sensor replaced still won't run without spraying with either. Once it's starts runs fine. But if you cut it off will not start again with out starting fluid. Hooked up lab top only codes are crank and cam shaft sensor. But they have been replaced. What should I do.
JA: We'll do all we can to help. Is there anything else important you think the Heavy Truck Mechanic should know?
Customer: Replaced every major part. But problem persist.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Truck Mechanic about your situation and then connect you two.
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Expert:  William Herren replied 11 months ago.
Hello my name is ***** ***** I will be assisting you. Can I please get your engine make and serial number?

Related Medium and Heavy Trucks Questions