How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1643
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

What can I replace a v378 v6 cummins in a 667d skidder with

Customer Question

what can I replace a v378 v6 cummins in a clark 667d skidder with
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: there is water getting into the oil and I cant get parts to fix the current motor
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 6 months ago.
Category: Medium and Heavy Trucks
Expert:  Curtis B. replied 6 months ago.

Clark used the Cummins and Detroit 4-53 in this skidder. But with a conversion always comes problems. unless you can find Detroit from the same model skidder. With any change over, flywheel and bellhousing are always concerns. You say you can't find parts for the Cummins V378?

Related Medium and Heavy Trucks Questions