How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 8274
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have no brake pedal on my buster fork lift. Does the hydro

Customer Question

I have no brake pedal on my buster fork lift. Does the hydro boost system have anything to do with this. No air in brakes. I bleed from master to wheel cylinders
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: Brake pedal on my fork lift going to the floor. Bled system, no air, no leaks.I noticed that it has a hydro boost brake setup. Before I order a master cylinder. I would like to know. Old hyster forklift. By propane model. 1997-1998 model?
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: No
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 5 months ago.

Hi I'm Wayne

I will help you with this ard fNo booster would give you a hull pedal

Master sinks to the floor.this helped you

I suggest replace master

I hope this helped you

Please rate 3 or more stars

Expert:  Wayne replied 5 months ago.

Hi Just a follow up with you

did my answer help you

let me know ,Please

Expert:  Wayne replied 4 months ago.


Just a follow up with you

did you get this issue resolved

let me know

Related Medium and Heavy Trucks Questions