How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Cat Man Your Own Question
Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 8679
Experience:  I am ASE Master Truck Certified.
30708357
Type Your Medium and Heavy Trucks Question Here...
Cat Man is online now
A new question is answered every 9 seconds

Cat Man, I'm looking 475HP flash file(###) ###-####for

Customer Question

Hi Cat Man, I'm looking for a 475HP flash file(###) ###-####for a C-15 serial number 6NZ54000-UP engine. I was wondering if you would be able to send it to me. I also was wondering if you could provide me with a 500HP Flash File for the same engine.
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Expert:  Cat Man replied 11 months ago.
Thanks for asking your question. I will try and help you out.
Yes I can get these for you. No problem. What's your email address?
Customer: replied 11 months ago.
Customer: replied 11 months ago.
thank you
Expert:  Cat Man replied 11 months ago.
You are very welcome my friend. I am happy I could help.
I will get the FF for you. The system to download is currently down. But it will be back up shortly. I will have it to you within the hour. Is that ok?
Customer: replied 11 months ago.
perfect. Thank you again
Customer: replied 11 months ago.
could you also send me for 550HP when the system comes back on. Thanks
Expert:  Cat Man replied 11 months ago.
I can do that.
Expert:  Cat Man replied 11 months ago.
FF are on the way.Let me know if you need anything else.
Customer: replied 11 months ago.
Thank you. I was able to flash the computer with the 550HP file but I took it for a drive and the engine rpm won't go past 1400. Do you know why this is happening?
Expert:  Cat Man replied 11 months ago.
Thanks for the information.
Did you check or program the rating? Sometimes you must select a rating in the configuration screen at the very top or the rpm will be limited. I would check that first
Customer: replied 11 months ago.
When I click on the rating there is only one option. Is there anything specific that I have to do in order to select the rating?
Expert:  Cat Man replied 11 months ago.
Thanks for the information.
No. Nothing special. Most have only one option. Just click on the one rating and select ok.
Expert:  Cat Man replied 11 months ago.
Hey. Were you able to get it going?
Customer: replied 11 months ago.
thank you so much. I just have one last question on this truck. The odometer doesn't show mileage or hours, it only shows dashes. I tried switching between the data link parameter settings but that does not seem to be working. Would you know any other possible reason for this?
Expert:  Cat Man replied 11 months ago.
You are very welcome my friend. I am happy I could help.
That sounds like a speedometer issue. I do not think the ECM would cause that.
Please reply back if you need more help or have more questions. I am happy to assist.
Expert:  Cat Man replied 11 months ago.
Hey. I just wanted to see how things were going. Please let me know if you need more help. I am happy to assist. If my information was helpful, please leave a good or higher rating so that I receive credit. Thanks.
Expert:  Cat Man replied 11 months ago.
Hey. I just wanted to see how things were going. Please let me know if you need more help. I am happy to assist. If my information was helpful, please leave a good or higher rating so that I receive credit. Thanks.

Related Medium and Heavy Trucks Questions