How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1131
Experience:  Technican with 20 years experience focused on engines and electrical.
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

What can cause flash code 41 on a 60 series 12 liter engine

Customer Question

What can cause flash code 41 on a 60 series 12 liter engine ? The truck sounds like it almost wants to crank and black smoke comes out exhaust. 41 only shows up after trying to start the engine.No other active codes. I tried another good ecm, replaced both timing senors, and I even put a brand new sensor harness. I think the timing gears may have a problem, but what little I can see without the front structure off doesn't appear to be chipped.
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Expert:  go-west.. replied 5 months ago.
Good day this code pertains to your srs sensor which is off your cam.and the trs sensor that's off the crank the code indicates the srs is responding and not the trs
Customer: replied 5 months ago.
Could a faulty crankshaft cause the lack of trs ?
Expert:  go-west.. replied 5 months ago.
Yes sir it's a good start more important check the pins at that sensor
Customer: replied 5 months ago.
I will check them again, but a brand new harness should have good pins.
Expert:  go-west.. replied 5 months ago.
yes sounds like it

Related Medium and Heavy Trucks Questions