How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1597
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Dt 466 will only run if I put 12v to fuel solenoid with power

Customer Question

Dt 466 will only run if I put 12v to fuel solenoid with power probe,remove power and dies
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: Dt 466 was running fine ,all of sudden tried to starrt and just crank ,no voltage at electrical fuel solenoid with key on
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: Checked fuses
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Customer: replied 5 months ago.
Ok been there done that
Expert:  Wayne replied 5 months ago.
Hi I'm Wayne I will try to help you with this what is the year ,Please
Customer: replied 5 months ago.
Expert:  Wayne replied 5 months ago.
HI Thank you for that use a volt meter ans see is you are getting any type of voltage like 2,3,4 volts or is it zero
Customer: replied 5 months ago.
Customer: replied 5 months ago.
I hav a second Trk with same motor and it s getting 12 volts when I check it
Expert:  Wayne replied 5 months ago.
Thank you for thatSwap the ECM, with themsounds like a ECM issue
Customer: replied 5 months ago.
Does power for fuel solenoid come from ecm?
Expert:  Wayne replied 5 months ago.
Hi Yes it does, but not sure which Pin

Related Medium and Heavy Trucks Questions