How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1889
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have an Altec material handling bucket truck. We just had

Customer Question

I have an Altec material handling bucket truck. We just had a new Hyd pump installed but I don't think the mechanic set the pressure. I spoke with an Altec tech earlier today and told me how and here to attach a gauge and test the pressure. But how do you adjust the pressure? Is there an adjustment screw on the pump?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Bradley Martin replied 1 year ago.
Do you know the model and serial number of the lift?
Customer: replied 1 year ago.
No I'm no longer there, 55ft working ht material handler
Customer: replied 1 year ago.
I can get it tomorrow
Expert:  Bradley Martin replied 1 year ago.
Ok there should be a valve on top of the pump that has an allen screw on it that should be where you will adjust the pressure did you notice anything like this on top of the pump
Customer: replied 1 year ago.
No I have never messed with it, can we continue this tomorrow when I am with the truck?
Expert:  Bradley Martin replied 1 year ago.
I will be working tomorrow I will read my emails through out the day
Customer: replied 1 year ago.
Ser# ***** 43233I can't find the plate that had the pressure numbers, and I can see where some one took a plate off of it. If you could provide me with The pressure info and a drawing of the pump and directions on how to adjust it that would be great. Thanks!
Expert:  Bradley Martin replied 1 year ago.
Ok let me do some research and see what I can come up with
Customer: replied 1 year ago.
Any progress
Expert:  Bradley Martin replied 1 year ago.
Have you been talking with Ed from altec?
Customer: replied 1 year ago.
problem is now resolved.
Expert:  Bradley Martin replied 1 year ago.
Ok would you like me to submit for refund
Customer: replied 1 year ago.
please
Expert:  Bradley Martin replied 1 year ago.
Done have a great day

Related Medium and Heavy Trucks Questions