How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roybelding Your Own Question
roybelding
roybelding, Shop Foreman Freightliner trucks
Category: Medium and Heavy Trucks
Satisfied Customers: 4957
Experience:  Shop Froeman for Freightliner Trucks
3506196
Type Your Medium and Heavy Trucks Question Here...
roybelding is online now
A new question is answered every 9 seconds

2012, dd15 codes. eng 1, faule 1, fail 19, 111 spn what

Customer Question

2012, dd15 codes.
eng 1, faule 1, fail 19, 111 spn
what are these codes telling me?
Submitted: 9 months ago.
Category: Medium and Heavy Trucks
Expert:  roybelding replied 9 months ago.
good afternoon my name is ***** ***** I will assist below is the description of the code and checks to perform. Roy 72.1  SPN 111/FMI 1 - EPA07 - EPA10 - GHG14Coolant Level Very Low SPN 111/FMI 1DescriptionCoolant level below normal rangeMonitored ParameterCoolant LevelTypical Enabling ConditionsAlways onMonitor SequenceNoneExecution FrequencyContinuous when enabling conditions metTypical Duration2 SecondsDash LampsCELEngine ReactionNoneVerificationCycle Key Check as follows:Show/Hide CheckboxesIs the vehicle an EPA10 or newer model?Yes; ensure Motor Control Module (MCM), Aftertreatment Control Module (ACM), and Common Powertrain Controller (CPC) software levels are 7.6/8.6/R22 or higher. After reprogramming, clear faults. If they do not become active, verify coolant level is correct and release the vehicle. If software levels are correct or faults become active, Go to step 2.No; Go to step 2.Check the coolant level in the reservoir. Is the coolant level in the reservoir within limit (2) or (3)?Yes; fill to proper level (1) with coolant. Go to step 3.No; replace the Engine Coolant Level (ECL) sensor. Refer to section "Engine Coolant Level Sensor" .Check the following for leaks. Verify repairs.Check for coolant leak at cylinder head gasket.Check for coolant leak at air compressor head gasket.Check for external coolant leak at hose connections.Check for coolant in oil.Check for loose or faulty radiator cap.Check cab heating system for leaks. Printed Sun May 01 2016 15:27:15 GMT-0400 (Eastern Daylight Time)Copyright © 2016 by Detroit Diesel Corporation. All rights reserved.
Expert:  roybelding replied 9 months ago.
please dont froget to rate me as it is the only way I get paid for my efforts Roy
Expert:  roybelding replied 9 months ago.
please dont forget to rate me 3 stars or above as it is the only way I get paid for my efforts Roy
Expert:  roybelding replied 9 months ago.
please dont forget to rate me 3 stars or above as it is the only way I get paid for my efforts Roy

Related Medium and Heavy Trucks Questions