How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 8259
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

How to change oil pan 2005 4300 international dt 466

Customer Question

how to change oil pan 2005 4300 international dt 466
Submitted: 5 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 5 months ago.
Hi I'm Wayne I will help you with this jack the front end up , then put the jack stand on frame, not axle , drop it down this will let axle drop about 8" and roomto remove the oil pan, drain oil, remove he bolts,remove the front bolts in timing cover 1st , then rear and then sidesI hope this helped you Hi If this helped you Please remember to rate my answer 3 or more starsIf more info is needed, use the reply buttonNOT THE POOR/BAD SERVICE
Expert:  Wayne replied 5 months ago.
Hi Just following up with you did my answer help you let me know, please Wayne

Related Medium and Heavy Trucks Questions