How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west..
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1185
Experience:  Technican with 20 years experience focused on engines and electrical.
35815791
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

Clayton i see you answer some questions on freightliner

Customer Question

Hello Clayton i see you answer some questions on freightliner Cascadia 2009... I have a problem with one...
The truck stopped working while waiting to be unloaded... The shop where the truck was said that the problem was the ecm... They replaced it for a new one.. After replacing it truck did the exact same thing.. Only cranks but it doesnt start... I need help with this one... Several techs have reponded before but havent been able to help me
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  go-west.. replied 1 year ago.
Good evening may I be able to help?
Customer: replied 1 year ago.
Ok... Where do we start West ?
Expert:  go-west.. replied 1 year ago.
Couple things
When you first turn on the key what does it say on the odometer screen
Any active faults and if so what are they?
Does this truck have a dd 15?
Customer: replied 1 year ago.
60 series 14l
Customer: replied 1 year ago.
Ill get the codes first thing morning !!!
Expert:  go-west.. replied 1 year ago.
Perfect
Customer: replied 1 year ago.
Cab 249, ssu 164,
Customer: replied 1 year ago.
Thats all it shows...
Customer: replied 1 year ago.
?
Expert:  go-west.. replied 1 year ago.
Does the check engine light cycle?
Can I get the last 6 of your VIN plz
Customer: replied 1 year ago.
Ad8148
Expert:  go-west.. replied 1 year ago.
really sorry for the delaywe have to check the mcm for power and groundat 11-12-14-15 there should be batteryat 7 is keyand 5 is groundThese wires are at the small connector at the engine ecmLet me know how you do.
Customer: replied 1 year ago.
Do you have a diagram
Customer: replied 1 year ago.
Pins 11,12,14,and 15 should be power ?
Customer: replied 1 year ago.
This is what the truck does!!! I replaced the ecm, fuel pump, and engine harnesses to ecm because they were full of oil... Just cranks
Customer: replied 1 year ago.
http://youtu.be/06f-2elUiJY
Customer: replied 1 year ago.
The check engine does cycle, when im starting the truck the stop engine light cones on but when i press the override it does not respond
Expert:  go-west.. replied 1 year ago.
Hey did you confirm power and ground as we discussed?
Customer: replied 1 year ago.
So you said 11,12,14 and 15 should be power ?
Customer: replied 1 year ago.
5 is ground and 7 is ?
Expert:  go-west.. replied 1 year ago.
7 is key power
request a live chat with me
Are are you located

Related Medium and Heavy Trucks Questions