How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4373
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Exhaust aftertreatment warning light flashing along with check

Customer Question

Exhaust aftertreatment warning light flashing along with check engine light. Parked regeneration required. How is this done?
Submitted: 7 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 7 months ago.
Hi my name is***** is the Year make and model of your truck? Engine make and model?
Expert:  Daniel Wilson replied 7 months ago.
If Detroit....Parked Regeneration ProcedureThe engine should be fully warmed up (coolanttemperature above 185F)Engine must be at slow idle (can not be in Fast Idleor PTO Mode)The transmission must be in neutralSet the park brake (cycle the park brake OFF to ON)Press and release the clutch pedal (if configured)Hold the DPF Switch to theON position for five (5)seconds and release (engine speed will increase andDPF Lamp will go out)The regeneration will take approximately 20-40 min.The regeneration is complete when the enginereturns to low idle andthe DPF lamp remains off.If the DPF lamp comes back on the regenerationfailed. (Contact the Customer Support Center)
Expert:  Daniel Wilson replied 7 months ago.
Click on this link for a PDF file to print out for future reference if needed.Parked Regen
Expert:  Daniel Wilson replied 7 months ago.
Hi, Did you get this resolved?

Related Medium and Heavy Trucks Questions