How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1635
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have changed the range selector and the regerlator. Still

Customer Question

I have changed the range selector and the regerlator. Still sometimes I can't get my bottom 5 gears the low side of the transmission
Submitted: 8 months ago.
Category: Medium and Heavy Trucks
Expert:  roybelding replied 8 months ago.
good evening my name is ***** ***** I will assist there are a couple of possibilities for this. the x/y shifter is common, the wiring harness for this is common as well. make sure there is no air leaks at the top cover. also, the range cylinder may also be the failure in the top cover. what else have you done??? Roy
Customer: replied 8 months ago.
As of now that's all I have done
Expert:  roybelding replied 8 months ago.
ok, first, check for the air leaks. air leaks will cause crazy issues.can you manually shift into the lower gears??
Customer: replied 8 months ago.
Well I'm going to go out and check for leaks now
Expert:  roybelding replied 8 months ago.
ok, will be on for a while
Expert:  roybelding replied 8 months ago.
how are you making out

Related Medium and Heavy Trucks Questions