How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4398
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

2012 NO 268 P141F ENGINE CODE. HAVE DX CANT GET ANY CODE OUT

Customer Question

2012 HINO 268 P141F ENGINE CODE. HAVE DX CANT GET ANY CODE OUT OF OTHER PARTS OF SCANNER SUCH AS UNDER BURNER HEADING ETC
JA: Thanks. Can you give me any more details about your issue?
Customer: TRUCK RUNS FINE NO OTHER CODES. CODE WONT CLEAR.
JA: OK got it. Last thing — Technicians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 8 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 8 months ago.

Hi, My name is***** is a problem with the DPF system . Remove the injector and inspect it. Most likely the tip will be damaged and overfueling which is common. Replace the injector. Let me know

Customer: replied 8 months ago.
DAN I REMOVED THE TIP AND CHECKED IT. IT WAS CLEAN AND HOLE IN UNIT WAS CLEAN. WHEN I TRY TO READ BURNER CODES IT SAYS BURNER CODES NOT AVAILABLE. ANY IDEAS?
Customer: replied 8 months ago.
REALLY SAYS BURNER CODES CANT BE READ.
Expert:  Daniel Wilson replied 8 months ago.

what is the complete engine model in this truck. I will dig through my manuals and see if I can find any more details on this for you

Expert:  Daniel Wilson replied 8 months ago.

Hi Did you get this resolved?

Related Medium and Heavy Trucks Questions