How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4647
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I HAVE AN iVECO 2003 TURBO DAILY TRUCK 40C13 AND THE DASH

Customer Question

hI I HAVE AN iVECO 2003 TURBO DAILY TRUCK 40C13
AND THE DASH PUTS UP A FAULT CODE SOMETIMES OF E1 could you tell me what this is please. Also we recently put new front brake disc pads on and replaced the brake disc wear disc indicator wires as well and light on dash still
Submitted: 12 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 12 months ago.

Hi my name is***** will be glad to try to help. Let me check my manuals for this information.... What other fault codes are you getting and or symptoms?

Customer: replied 12 months ago.
The E1 code only comes up now and again. But really annoyed about the Brake system failure and front brake lining wear light always stays on - on the instrument panel, we have had new pads put on and new break wear indicator wires replaced as well. why hasn't the light gone out. Brake fluid level is good. light is supposed to go out once pads have been renewed
Expert:  Daniel Wilson replied 12 months ago.

1E 08 VEHICLE -CLUTCH SIGNAL SUSPECT SIGNAL NOT PLAUSIBLE Clutch switch:signal either not plausible or not present. Cruise Control / PTO not working or engine revs up to maximum speed when clutch pedal is pressed and Cruise control /PTO is on.Gear shift detected without pressing brake pedal.Check wiring and connections.Replace sensor if required.The anomaly caused by incomplete clutch operation if everything is OK