How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4385
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Have 07 Columbia MBE 4000; when turn on switch/guages

Customer Question

have 07 Columbia MBE 4000; when turn on switch/guages sweep..oil stays @ ***** ***** (100psi)..voltage stays @ 12...will not start..turns over...a touch of ether..almost starts...vin y96533...245k mi...not much prior issues
JA: Thanks. Can you give me any more details about your issue?
Customer: unplugged sensor @ oil filter...no affect...unplugged oil guage...no affect...ecu 128/fault 01 i believe...was SID 248..
JA: OK got it. Last thing — Technicians generally expect a deposit of about $54 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 9 months ago.
Category: Medium and Heavy Trucks
Customer: replied 9 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 9 months ago.
before this issue occured...welded a bracket to front for grill guard..took off both pos/& neg cables of battery 1st tho...all else seems function ok...however...the lights in main guage panel did not wk @ nite before this either...wander if 100 psi of oil guage prevents engine from starting...stays @ 100 or max when switch key on after initial sweep...
Expert:  Daniel Wilson replied 9 months ago.

Hi my name is***** fault is for loss of communication between the VCU and PLD.... Either a loss of power to the module, harness problem, or bad module. Click here for troubleshooting.

Troubleshooting

Expert:  Daniel Wilson replied 9 months ago.

Hi, Did you get this resolved?

Expert:  Daniel Wilson replied 9 months ago.

Hi, Did you still need help with this?

Related Medium and Heavy Trucks Questions