How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4647
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

N14 cummins keeps blowing all the head gaskets after

Customer Question

N14 cummins keeps blowing all the head gaskets after overhauling. When trying to start engine
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  cumminsdr replied 1 year ago.

We're the heads replaced and liners replaced. Was the liner protrusion checked prior to reassembly to make sure they are inspec.

Expert:  cumminsdr replied 12 months ago.

Hi just following up.

Expert:  Daniel Wilson replied 11 months ago.

Hi, Its Dan. Check the head sealing surface compared to specs as well as the counter bores for cracks and out of spec liner protrusion. If in specs also verify your timing is in specs.

Expert:  cumminsdr replied 11 months ago.

any luck? just following up

Expert:  Daniel Wilson replied 11 months ago.

Hi Did you get this resolved?