How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 8438
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a 1986 Scania T112 motor DSC 11-03,340 power, I need

Customer Question

I have a 1986 Scania T112 motor DSC 11-03,340 power, I need to put more power to go up hills, How would i do that, What Turbo do i need or update torch
Thanks,
Ailton DeFaria
Submitted: 9 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 9 months ago.

Hi I'm Wayne

I will help you with this

do you have a turbo on it now

let me know, Please

Customer: replied 9 months ago.
no not yet,
Customer: replied 9 months ago.
Sorry, yes i do
Customer: replied 9 months ago.
Hello
Customer: replied 9 months ago.
Can you please answer my question from above.
Expert:  Wayne replied 9 months ago.

Hi

Do you have a Turbo on it now

or wanting to add one

Customer: replied 9 months ago.
I have on but I want to add one to have more power
Expert:  Wayne replied 9 months ago.

Thank you for that

OK, you want a bigger one

give me a bit to look it up

Expert:  Wayne replied 9 months ago.

HI

Here is P/N for upgrade

will give another 20-25 Hp

Part Number/s

  1. 3597654
  2. 3591777

Comparison Number/s

  1. 571541
  2. 1485645
  3. 1485646
  4. 571539
  5. 1423036

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Customer: replied 9 months ago.
I would like to go 400 or 425 HP, you think the motor will blow up if i did that?
Expert:  Wayne replied 9 months ago.

Hi

YEP, not a doubt in my mind

your other option is to change the rear end

go with a higher gear Ratio

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Customer: replied 9 months ago.
can you give me the name of the company that makes the turbos
Expert:  Wayne replied 9 months ago.

HI

Here it is

contact them E-Mail

click here

Please remember to take the time and rate my answer,so I get the credit for question

Customer: replied 9 months ago.
i am a mechinic i know if i open the fuel the injector pump and i put a big turbo that would work, i want to find out how much fuel burn though the pistons not to make a hole in the pistons and damage the motor.
Expert:  Wayne replied 9 months ago.

HI

I don't have the answer to that ,

that would come from a Engineer , on the compression,

valve over lap, the tensil of the liners and back pressure

You are a Tech, so I fell I am not going to get a accept on this question

is this correct

Wayne

Customer: replied 9 months ago.
ok, Thank you anyway
Expert:  Wayne replied 9 months ago.

Your welcome,

So this means all my time spent,

and answers to your questions was for free

I just spent my Time ???

Expert:  Wayne replied 9 months ago.

Hi

I am just following up with you ,

did my answer help you

Let me Know . Please

Please, take the time to Rate my answer.So I get credit for my time for the answer

Let me know so I can rate you for more information on future questions

Related Medium and Heavy Trucks Questions