How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 9068
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

Dt 466e engin international when batt terminal hook to batt,

Customer Question

hi dt 466e engin international when batt terminal hook to batt, engine starts turning over like trying start, this all started while attempting to try starting truck ,
JA: Thanks. Can you give me any more details about your issue?
Customer: Dont know much hust helping out freind , basically truck wouldnt start freind changed fuel filter after running out fuel tried start truck without priming system ,this where i come in i prime hand pump alot tried start engine nothing batts where low now dead ,put on charger noticed only has two batts700 cca , after batt charg i did the pump their on motor tried start nothing tried couple more times now kepps cranking ,without turning key or pushing button, had unhook battery cable to stop engine turn over, and my buddy just bought this thing so hard telling what been done , point me in right direction big help
JA: OK got it. Last thing — Technicians generally expect a deposit of about $54 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

This is a common thing, I have seen this many times

what happened is the brass disc in the solenoid is arc closed from the cranking

I suggest you replace the starter , or it may do it while you are

driving, and ruin the ring gear

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Expert:  Wayne replied 1 year ago.

Hi

I'm Just following up with you

did my answer help you

Please let me Know

Wayne

Related Medium and Heavy Trucks Questions