How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1643
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

2006 FUSO FM260 THE MCU AND TRANS LIGHT ON WITH NO POWER

Customer Question

2006 FUSO FM260 THE MCU AND TRANS LIGHT ON WITH NO POWER WHILE DRIVING
Submitted: 9 months ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 9 months ago.

Hi my name is***** fault codes are you getting and also what is the engine model ?

Customer: replied 9 months ago.
no fault codes ,just what i see on the dash and its running like its in limp mode.disconnected the batt and the mcc light came off but the trans line stayed on .but then came back on
Expert:  Daniel Wilson replied 9 months ago.

There should be some fault codes logged. Is there someone you know that can plug it in to a scan tool?

Customer: replied 9 months ago.
No
Expert:  Daniel Wilson replied 9 months ago.

Mitsubishi Fuso: Clearing Diagnostic Trouble Codes

FE, FG, FH, FK & FM Electronic Engine Control System

Less Scan Tool

With diagnosis switch removed, remove Memory Clear Switch, warning lamp will start flashing codes, record codes. The memory switch is also located at rear of relay and fuse box. Reconnect memory clear switch to erase DTCs.

Expert:  Daniel Wilson replied 9 months ago.

Click here.

Fault codes

Expert:  Daniel Wilson replied 9 months ago.

Let me know what you get for codes.

Related Medium and Heavy Trucks Questions