How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cat_engines_only Your Own Question
cat_engines_only
cat_engines_only, Other
Category: Medium and Heavy Trucks
Satisfied Customers: 2304
Experience:  Repair CAT machines only
11546476
Type Your Medium and Heavy Trucks Question Here...
cat_engines_only is online now
A new question is answered every 9 seconds

I have a d-4 cat d4c hystat dozer just rebuilt the engine

Customer Question

Customer: i have a d-4 cat d4c hystat dozer just rebuilt the engine and new trans pump all new hoses and hydralic system cleaned and new filters installed everything works fine except the tractor runs slow not much change from rabbit to turtle i understand there are some pressure adjustments where can i find the specs to set the pressures
JA: Thanks. Can you give me any more details about your issue?
Customer: really the only problem is the speed of the dozer does not seem to be as fast as it was before we changed the pump
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $54) to post your type of question to Heavy Equipment Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: yes
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Customer: ok
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  cat_engines_only replied 1 year ago.

Hello,

Please post the full machine serial number so I can find the correct information.

Customer: replied 1 year ago.
8cs00623 is the derial number
Expert:  cat_engines_only replied 1 year ago.

I would suggest you check and adjust the speed sensing cable.

I have attached a file that will show you how to do it.

Please let me know if you need further help.

Related Medium and Heavy Trucks Questions