How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1571
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

ON A 2004 INTERNATIONAL 4300, WHEN COMING TO A STOP AND I T

Customer Question

ON A 2004 INTERNATIONAL 4300, WHEN COMING TO A STOP AND I HIT A LITTLE ROUGH PLACE IN THE ROAD THE LIGHT COMES ON "SHIFTER OUT OF RANGE" AND I HAVE TO MOVE THE SHIFTER FORWARD OR BACK AND THEN INTO DRIVE BEFORE IT WILL PULL AGAIN. I HAVE REPLACE THE NUETRAL SAFETY SWITCH STILL HAVE THE SAME PROBLEM?
Submitted: 12 months ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 12 months ago.

Hi my name is***** may have low power issues to the transmission TCU. Can we start with the last 8 digits of the vin number please?

Customer: replied 12 months ago.
1HTMMAAM95H161908
Expert:  Andy replied 12 months ago.

Thanks

Expert:  Andy replied 12 months ago.

Sorry about the delay ! Here is the wiring diagram for your transmission .

https://www.dropbox.com/s/mpavbo4d08zf6y8/tranny1.PNG?dl=0

I would start by load testing all the powers and grounds directy at the TCU connector using a load light

Related Medium and Heavy Trucks Questions