How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1898
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

2001 INTERNATIONAL 9200I ISM ENGINE WHEN REPLACING INJECTOR

Customer Question

2001 INTERNATIONAL 9200I ISM ENGINE WHEN REPLACING INJECTOR HOW DO YOU READJUST ROCKER ARMS OR WHAT IS THE PROCEDURE TO REPLACE INJECTOR ENGINE HAS A JAKE BRAKE
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne again

I will help you with this

I thought you were going to accept my answer from previous question

before we continue on

Customer: replied 1 year ago.
I DID GAVE YOU FIVE STARS QUIT WASTING MY TIME AND ANSWER THE QUESTION
Expert:  Wayne replied 1 year ago.

Morning

The intake valve rocker lever is always the long lever on the valve rocker lever shaft.

Valve Lash Specification

IntakeNOM0.014

ExhaustNOM0.027

Tighten the injector lever adjusting screw.

Do not use a click-type torque wrench.

Use a dial-type torque wrench

Torque Value:8 n.m[71 in-lb]

Engine Brake7.00 mm [0.276 in]

Loosen the locknut on the brake lever adjusting screw, and back out the adjusting screw one turn.

Insert the feeler gauge, Part Number(###) ###-####SPECIAL TOOL FROM CUMMINS , between the bottom of the engine brake piston and the top of the exhaust valve pin on the exhaust valve crosshead.

The valves, brakes, and injectors on the same cylinder are adjusted at the same index mark on the vibration damper.

Injector and Valve Adjustment Sequence

Bar Engine in Direction of RotationPulley PositionSet Cylinder InjectorSet Cylinder ValveSet Cylinder Brake

StartA111

Advance toB555

Advance toC333

Advance toA666

Advance toB222

Advance toC444

Firing Order: 1-5-3-6-2-4