How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1641
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

04 Western Star with series 60. No stop engine light and no

Customer Question

04 Western Star with series 60. No stop engine light and no start
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  roybelding replied 1 year ago.

good morning my name is ***** ***** I will assist

does the check engine light come on with the key on???

are there any codes set???

Roy

Customer: replied 1 year ago.

Yes, have check eng light, no stop eng light and haven't put scanner on yet. Will do though

Expert:  roybelding replied 1 year ago.

it will help if I had any current codes

is the fuel filter full??? can you check fuel pressure at the fuel pump???

Roy

Customer: replied 1 year ago.

I know if both lights do not come on, no power to the ecm. Didn't know if it was same with one light not coming on. Had this problem last week. Moved some wiring on battery and found broken wire. Seemed to be the prob and now Monday morn doing it again

Expert:  roybelding replied 1 year ago.

I assume you re checked that wire and the fuse???

lets start with basics

Roy

Customer: replied 1 year ago.

Yes I have. Cannot hook lap top up.

Expert:  roybelding replied 1 year ago.

what is the issue with your laptop??

Roy

Customer: replied 1 year ago.

Not lap top. Id say no power to ecm

Expert:  roybelding replied 1 year ago.

did you verify the wire at the battery and the fuse???

did you check the connector for the ecm for the power sources???

Roy

Related Medium and Heavy Trucks Questions