How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roybelding Your Own Question
roybelding
roybelding, Shop Foreman Freightliner trucks
Category: Medium and Heavy Trucks
Satisfied Customers: 4652
Experience:  Shop Froeman for Freightliner Trucks
3506196
Type Your Medium and Heavy Trucks Question Here...
roybelding is online now
A new question is answered every 9 seconds

I got freightliner 2013 caskadia. my cruise control and

Customer Question

I got freightliner 2013 caskadia. my cruise control and engine brake doesnt work . have any idea why
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  roybelding replied 1 year ago.

good afternoon my name is ***** ***** I will assist

the most common failure for both together is a bad clutch switch. it will not allow either to operate. I would have this checked first

Roy

Customer: replied 1 year ago.
The switch is good
Expert:  roybelding replied 1 year ago.

did you check both positions??? high and low?? it will still start ok but can still block the cruise and jakes

are there any stored or active codes in sam cab or sam chassis??

Roy

Customer: replied 1 year ago.
I checked all codes and switches all look good
Expert:  roybelding replied 1 year ago.

ok were there any codes or do you mean there are none??? please clarify

does the cruise light come on the cluster when you turn the truck on??? can you raise the idle with the switches on the steering wheel??

Roy

Expert:  roybelding replied 1 year ago.

how are you making out??

Customer: replied 1 year ago.
I got it was a sensor
Thx
Expert:  roybelding replied 1 year ago.

which sensor???

Roy

Customer: replied 1 year ago.
Under clutch
Expert:  roybelding replied 1 year ago.

at the pedal or the down on the bell housing?? just trying to see the fix for future reference

Roy

Customer: replied 1 year ago.
By pedal
Expert:  roybelding replied 1 year ago.

thats the clutch switch I told you about.

Roy

Expert:  roybelding replied 1 year ago.

how are you making out?

Related Medium and Heavy Trucks Questions