How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1703
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

My cummins ism 370 check fluid light and stop engine light

Customer Question

my cummins ism 370 check fluid light and stop engine light come on when pulling a load. if i back off on pedal it stops after a few seconds?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Geoff replied 1 year ago.

Hi my name is ***** ***** I'd like to help you. Can I ask what vehicle this is in and what the engine serial number is?

Customer: replied 1 year ago.
2001 VOLVO WGM
ENGINE 35016051
Expert:  Geoff replied 1 year ago.

Thank you. Are you able to check which fault code is stored in the memory?

Customer: replied 1 year ago.
NO
Customer: replied 1 year ago.
NO FAULT CODE . JUST CHECKED
Expert:  Geoff replied 1 year ago.

When this happens, what is the reading for oil pressure? Also, is there a reduction in engine power?

Customer: replied 1 year ago.
no reduction in power. oil pressure reads a little low. oil pump?
Expert:  Geoff replied 1 year ago.

It's possible. However, if there was low oil pressure, low coolant level, or high coolant temp, there would be a fault code. Just to make sure we're not missing anything, how did you check for stored faults?