How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roybelding Your Own Question
roybelding
roybelding, Shop Foreman Freightliner trucks
Category: Medium and Heavy Trucks
Satisfied Customers: 5147
Experience:  Shop Froeman for Freightliner Trucks
3506196
Type Your Medium and Heavy Trucks Question Here...
roybelding is online now
A new question is answered every 9 seconds

Have a 93 f250 with e40d Trans and 7.3 idimanual shift lever

Customer Question

Hello have a 93 f250 with e40d Trans and 7.3 idi*****manual shift lever will not stay in 2hi or 4hi unless hold pressure on lever it pops out when decelerating. Is transfer case shot?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  roybelding replied 1 year ago.

good evening my name is ***** ***** I will assist

some reasons it pops out of gear

1. incorrect ratios from front to rear. that is if one of the differentials has a different ratio than the other

2. tires, they need to be the same size. incorrect roll speed will cause it to pop out of gear

3. yes, the case itself is worn out. the syncros are bad.

Roy

Customer: replied 1 year ago.
Thanks tires are the same and differentials are factory whatwould be more economical to have it rebuilt or replaced with used part
Expert:  roybelding replied 1 year ago.

replacing with a used part. re build would be about triple the price

Roy

Related Medium and Heavy Trucks Questions