How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1571
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

I have a 2006 international 4300 tow truck that now the abs

Customer Question

I have a 2006 international 4300 tow truck that now the abs retarder is on as soon as the truck moves and it will not stop. Any ideas
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 1 year ago.

Hi there ! My name is ***** ***** I would like to try and help if I can . Can we start with the last 8 digits of the vin number please ?

Expert:  Andy replied 1 year ago.

Do you still need help?

Customer: replied 1 year ago.
6H233029
Expert:  Andy replied 1 year ago.

Can you please retrieve the engine flash codes ? Here is how .

https://www.dropbox.com/s/f526i7b69ifw887/How%20to%20check%20codes%20three%20digit.txt?dl=0

Customer: replied 1 year ago.
THERE ARE NO CODES NOW.
Expert:  Andy replied 1 year ago.

Ok thanks . I will look up vin as soon as I get home .

Expert:  Andy replied 1 year ago.

Does it idle OK ?

Customer: replied 1 year ago.
idles and runs fine
Expert:  Andy replied 1 year ago.

So the minute it moves , it dies?

Customer: replied 1 year ago.
No. it has nothing to do with running if you read my question it about the ABS retard coming on and the truck not stopping. Disregard my question I will go elsewhere thanks.
Expert:  Andy replied 1 year ago.

Ok . Sorry I wasn't much help !