How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2563
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

Im installing injectors aft cam failer in a cummmins isx to

Customer Question

hi im installing injectors aft cam failer in a cummmins isx to set injectors for the fist time do I bottom injector out then back off do my 8 nm setting of how dose this procedure work
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 1 year ago.

Hi, my name is ***** ***** you for your question, I will try and help you out.

Do you need the complete procedure or just need to know about injector setting?

Expert:  spankyjr1 replied 1 year ago.

You want to tighten injector screw a couple times to get any fuel or test stand fluid out of injector,,after that you torque down and don't back off.

Tighten the injector lever adjusting screw.
Torque Value:
8 n.m
[71 inlb]
Back the adjusting lever screw out 1 or 2 turns.
Tighten the injector lever adjusting screw.
Torque Value:
8 n.m
[71 inlb]
Hold the injector lever adjusting screw and tighten the adjusting screw locknut.
Torque Value:
75 n.m
[55 ft-lb ]

Please take a moment to rate my service so that I can get credit for my time from the web site ,without a rating the web site does not pay me.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.

Thanks
spanky

Related Medium and Heavy Trucks Questions