How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2585
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

2001 peterbilt c 12... What are the torque specs front

Customer Question

2001 peterbilt c 12... What are the torque specs for the front bearings and hub?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Cat Man replied 1 year ago.
Thanks for asking your question. I can help you with this.
Could you elaborate on your question please?
I'm not sure what you mean by front bearings? Are you referring to the idler gears behind the front cover?
Customer: replied 1 year ago.
I'm replacing the hub and bearings on the right side steering axle. I've got one nut and a cotter key. I need the torque specs for the nut n bearings.
Expert:  Cat Man replied 1 year ago.
Oh I see. I thought is was a C12 question. Sorry. I will opt out and see if another expert can help.
Expert:  spankyjr1 replied 1 year ago.
Sorry for all your troubles getting a answer do you still need assistance with this?
You torque two times,,first time 100 ft lbs while trying to rotate wheel ,back all the way off,,next to 50 ft lbs while trying to rotate wheel,,back off no more than 1/4 turn.
So if cotter pin lines up just before 1/4 turn and wheel spins free you can use that hole.Install cotter pin.
Sorry for all the delay's
spanky

Related Medium and Heavy Trucks Questions