How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1571
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

Excess blow by on a 8.3 l 350 isc 80000 miles.

Customer Question

excess blow by on a 8.3 l 350 isc 80000 miles.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 1 year ago.
Hi there ! My name is Andy ! Can we start with the engine serial number please?
Customer: replied 1 year ago.
family; YCEXH050CAG
ENG NO. 45986582
REF.NO.ISC350 MONACO/99E
Customer: replied 1 year ago.
OR(###) ###-####
Expert:  Andy replied 1 year ago.
Thanks for the info ! Here is the troubleshooter for this symptom https://www.dropbox.com/s/37n9rgw8lsj8p01/crankcase%20blowby.pdf?dl=0 Let me know if you need anything else ! Thanks .
Customer: replied 1 year ago.
can you provide the procedure for testing the compressor and the pac brake.
i have read this a common problem with this model engine and cummins had a upgrade for it (file included) do you have a install procedure for it as i have ordered it.
Expert:  Andy replied 1 year ago.
You need special tools to test crankcase pressure . Do you have them ? You need a manometer and a special fitting with a pre measured orifice that goes on the end of the draft tube .
Customer: replied 1 year ago.
with the engine running at1500rpm i can easily cover my thumb over the blow by tube and feel very little resistance on my thumb trying to blow it off the tube.would a psi gauge work?
Expert:  Andy replied 1 year ago.
Unfortunately no ! I will send a pic of the tools needed !
Expert:  Andy replied 1 year ago.
https://www.dropbox.com/s/badc6jgphswmfy7/tool.png?dl=0
Expert:  Andy replied 1 year ago.
I see you viewed the last post . Were you able to view the pic ok ?
Expert:  Andy replied 1 year ago.
Do you still need help ?

Related Medium and Heavy Trucks Questions