How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2529
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

How do you pull camshaft from older c series cummins it moves

Customer Question

How do you pull camshaft from older c series cummins it moves out about a half inch and stops
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 1 year ago.
Hi, my name is ***** ***** you for your question.
Sorry for delay.
Is this a NTC engine,, big/small cam ntc 855?
Why are you pulling cam, I will explain in answer?
Let me know
Customer: replied 1 year ago.
It is small cam 250 hp need to get front cover off then found out it needs cam bushing and one thing leads to another you no how that goes lol
Expert:  spankyjr1 replied 1 year ago.
Thanks for info.
That means fuel pump,air compressor, and cam followers housings need to come off. ALSO ALL PUSH TUBES,,,,,,.SOME ENGINES YOU CAN USE COAT HANGERS TO HOLD UP FOLLOWERS BUT I WOULD RESEAL ALL HOUSINGS WHILE FRONT COVER IS COMING OFF.
DO NOT MIX UP HOUSINGS BEHIND PUMP,COMPRESSOR,,THERE ARE 3.
DO NOT THROW AWAY GASKETS FOR THEM (HOUSINGS) THAT IS HOW ENGINE CAM IS TIMED,, KEEP ALL TOGETHER AND WHEN YOU PUT BACK ON YOU MIC THEM AND ADD SAME AMOUNT OF SHIMS (GASKETS) OR TIMING WILL BE OFF,,,TOOL COST 5 GRAND TO RESET THEM.
Questions or problems let me know I'm happy to assist.
A rating is required. You’re rating my personal service to you, not Just Answer. I am not an employee of this website, nor do
I have control over the fees or the time it took for you to get a response. I respond as soon as I see the questions in the order
that I receive them when I am online.
Also rating does not close your question, it just assures Just answer credits me,,, has nothing to do with you.You can continue
to follow up as long as needed even after rating
Thanks spanky
NOTE: I WILL BE IN/OUT THROUGH THE DAY IF YOU HAVE FOLLOW UP QUESTIONS.
Expert:  spankyjr1 replied 1 year ago.
Hi I'm just following up to see if you where satisfied with my answer.
Please keep in mind that even though you have already paid your deposit money
over to JustAnswer, or you may be a subscriber, until you rate me highly for my service,
I will not be paid for having assisted you with your questions.
Thanks
spanky

Related Medium and Heavy Trucks Questions