How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1571
Experience:  International trucks, International, Maxxforce and Cummins engines, diagnostic, electrical, Hvac and refrigeration repairs
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

Keeps throwing spn1209 ebp sensor has been replaced

Customer Question

keeps throwing spn1209 ebp sensor has been replaced
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 1 year ago.
Can we start with the last 8 digits of the vin number please ? Also , I need the full fault code ! There should be an SPN number and an FMI number for each fault code . Thanks .
Customer: replied 1 year ago.
Son 1209 FMI 0 Vin # *****
Expert:  Andy replied 1 year ago.
Thanks . I will look this up and send the steps to solve it tight after work today if that's OK ?
Customer: replied 1 year ago.
As soon as possible . Thanks
Expert:  Andy replied 1 year ago.
Will do ! Thanks for your patience.
Customer: replied 1 year ago.
Don't have answer ?
Expert:  Andy replied 1 year ago.
Sorry ! I had an emergency with one of my kids last night . I am currently at work and not available to get you the answer right now. I can either opt out and let Someone else answer you right away if someone is available or I can answer you after work today if that's OK !
Customer: replied 1 year ago.
after work will be ok
Expert:  Andy replied 1 year ago.
Thanks for your patience !
Customer: replied 1 year ago.
HAVE NOT RECEIVED ANSWER
Expert:  Andy replied 1 year ago.
Hi there . I just checked your vin number . Your ECM calibration is not up to date. It should be update as soon as you can as it has to do with regeneration improvements.
Your exhaust back pressure is too high during acceleration.
Step 1- check your intake manifold temp signal in servicemaxx or scanner after a cold soak( leaving truck sit for 3 hrs).
The temp sensors at that point should all be within 20 F of each other. Also temp should not be reading negativ. I spent wirinG to it and let me know what the results are . Thanks IK1201103 document
Expert:  Andy replied 1 year ago.
Ok ! I am home now ! Here are the rest of the steps for this code :
https://www.dropbox.com/s/5mh3bqwtzaud8fx/page%201.png?dl=0
https://www.dropbox.com/s/h2mk137dlwdb3qn/page%202.png?dl=0
https://www.dropbox.com/s/hubhpwcprufpptb/page%203.png?dl=0
https://www.dropbox.com/s/kl6tcnuotokf3lj/page%204.png?dl=0
https://www.dropbox.com/s/fox3ef85rrj1ihe/page%205.png?dl=0
https://www.dropbox.com/s/imhzo6tb8l3kr1m/page%206.png?dl=0
https://www.dropbox.com/s/8g9iej35vxohjt6/page%207.png?dl=0
https://www.dropbox.com/s/n265oqw1xior5zp/page%208.png?dl=0
https://www.dropbox.com/s/kospssoqpu50lr5/page%209.png?dl=0
https://www.dropbox.com/s/7ydzlqfsghz9z4s/page%2010.png?dl=0
https://www.dropbox.com/s/m4duib0wlvdtwm3/page%2011.png?dl=0
https://www.dropbox.com/s/brcrix8hry64fge/page%2012.png?dl=0
https://www.dropbox.com/s/mw4eao3mdz5dldn/page%2013.png?dl=0
Let me know if you need anything else and what you find . Thanks.

Related Medium and Heavy Trucks Questions