How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1634
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 96 l8000 with a md3560p at a stop it goes into "neutral&

Customer Question

i have a 96 l8000 with a md3560p at a stop it goes into "neutral" then bangs into first, had a 2112 code i replaced tps no change
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 1 year ago.
Hi, my name is ***** ***** you for your question.
Sorry for long delay would you still like assistance with this?
Did you calibrate tps?
Let me know
Customer: replied 1 year ago.
no i was told by the foreman of the allison shop you cant on a ford application
Expert:  spankyjr1 replied 1 year ago.
There is a adjustment on TPS that is why it is mounted on a slotted bracket.
I don't have time to argue about this so I will opt out.
This question will go back on open board for other experts to see if they would like to assist.
Please don't reply to me or it will come off open board.
Experts come and go throughout the day and night so I'm not sure when another expert will respond.
Good luck.

Related Medium and Heavy Trucks Questions