How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Your Own Question
Jeremy
Jeremy, Certified Truck/Bus Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 2779
Experience:  ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician
9290743
Type Your Medium and Heavy Trucks Question Here...
Jeremy is online now
A new question is answered every 9 seconds

2009 IH 4300 1HTMMAAL99H093880 Where is the sending unit

Customer Question

2009 IH 4300 1HTMMAAL99H093880 Where is the sending unit located for the oil pressure gauge and is the correct part number(###) ###-####91 ?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 1 year ago.
My name is ***** ***** I will assist you.
Your VIN is coming up as invalid. Based on the part number, you have the DT466. Yes, that is the correct part number.
Sensor is on driver side of the engine, about the center of the block, under the HPOP. See the pic I have attached.
http://www.mediafire.com/view/bck7pv99nmbhbbk/2009_International_oil_pressure_sensor.JPG