How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 4679
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Remove kingpin and bushing mack cs 300 spindal is froze will

Customer Question

remove kingpin and bushing mack cs 300 spindal is froze will not turn
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 year ago.
Hi my name is***** will be glad to try to help. First determine if you have a tapered or straight king pin and if there is a threaded retaining nut on one side or if you have the style that has a retaining pin through the spindle to hold the pin. If a retaining pin loosen the nut and use an air chisel to push the retaining pin out with the nut flush with the end of threads to prevent excessive mushrooming. When the pin is siezed you will need to use a press as the recommended way to remove it. Otherwise you will need to use heat, a big sledge hammer or cut the pin out which too much heat is not recommended. Copy and paste these links in your browser for some videos on the procedure. Let me know if you need more help
https://www.youtube.com/watch?v=cvR12q9yclE
https://www.youtube.com/watch?v=9iMstqlSBxg
https://www.youtube.com/watch?v=o8S8OJOU4iY
Customer: replied 1 year ago.
must be tapered. no bolt through axel
Customer: replied 1 year ago.
does pin come out up or down
Expert:  Daniel Wilson replied 1 year ago.
Thanks for the update. It depends on if yours is threaded on the smaller side. You will be able to tell. If threaded you push on the threaded side to remove. If unthreaded one side will be narrower and you push on the narower side of the pin. Copy and paste this link in your browser to help identify the pins you have.
http://truckpartsetc.com/sales/pdfs/dayton/dayton_steering_222.pdf
Expert:  Daniel Wilson replied 1 year ago.
Hi, Did you get this resolved? I wanted to follow up to see what you found and if my information was helpful to you or if you still needed more help? Let me know and I will get this question closed out for you if you don't need further help with this. Please feel free to rate or accept if you found my information helpful as that is how the experts receive credit for their time helping on the site.

Related Medium and Heavy Trucks Questions