How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2516
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

I HAVE A 2000 FREIGHTERLINER AUTOSHIFT. IT IS HAVING PROBLEM

Customer Question

I HAVE A 2000 FREIGHTERLINER AUTOSHIFT. IT IS HAVING PROBLEM SHIFTING INTO GEAR AND STAYING IN GEAR.WHEN GOING INTO A NEW GEAR IT WILL BLINK THEN ENAGE.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 1 year ago.
Hi, my name is ***** ***** you for your question.
I would like you to try and pull logged codes and let me know what you get?
Turn key on engine off,,cycle key off/on 4 times within 5 seconds ending with key on,,count flashes.
Let me know
Customer: replied 1 year ago.
I am not with the truck now. I will be there in about a hour.i can do it then. Is that ok ?
Expert:  spankyjr1 replied 1 year ago.
Yes thats fine.
I will be around but do have errands to run later today if you get tied up but I will respond after you reply.
You only need reply one time and I get a email notification.
Talk soon
Customer: replied 1 year ago.
My mechanic says no codes are coming up.can he talk with you by phone?
Expert:  spankyjr1 replied 1 year ago.
I can talk with him on phone but to do that I have to send you a offer for additional services which cost a little more but still a whole bunch cheaper then bringing in to diagnose or saving your mechanic a whole bunch of time trying to diagnose himself.
Not to mention down time.
I will send the offer if you accept I will reply with my phone number so he can call me from the shop.
Talk soon
spanky
Customer: replied 1 year ago.
I am trying to accept but it wont go thru. how do I get to my account page
Expert:  spankyjr1 replied 1 year ago.
Here try this and let me know if it does not work.
http://www.justanswer.com/profile.aspx?PF=86745098&FID=8821
copy and paste to open in new tab please
Customer: replied 1 year ago.
I just got a call from bank of America asking me if just had my card was declined three times. what going on?
Expert:  spankyjr1 replied 1 year ago.
Its probably the fraud department,, I have got them before to.
What happens is they see two transactions in a row and think someone stoled their card so they decline until you verify that it was a legit charge.
Call number on back of card to verify charges.
Its a shame in todays world there is so much stealing of CC info the banks are getting burned since customers are not responsable for the charges so they are cracking down.
Talk soon
Customer: replied 1 year ago.
If will take some time 15 min before we can try again,so what eles can he try while we wait? down time is ticking
Expert:  spankyjr1 replied 1 year ago.
Okay have him operate truck until light comes on,,do not shut truck off,,,then cycle key two times withing 5 seconds and count flashes,
even if engine dies it should give us a code
let me know
Also if you could get me the trans modal number I would appreciate it.
Thanks
Customer: replied 1 year ago.
no light is coming on when truck is running, when it wont engage the gear number it in, starting blinking then it will reengage.
Customer: replied 1 year ago.
when we make phone contact is any cost to these call?
Expert:  spankyjr1 replied 1 year ago.
Okay did he try pulling codes after it does this?
Have him try it both ways,, two key cycles and then 4 cycles of key and let me know
cost is whatever you agreed to!! I don't have anything to do with charges.