How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cumminsdr Your Own Question
cumminsdr
cumminsdr, Mechanic
Category: Medium and Heavy Trucks
Satisfied Customers: 3563
Experience:  All types of Cummins applications
28984014
Type Your Medium and Heavy Trucks Question Here...
cumminsdr is online now
A new question is answered every 9 seconds

Fuel pressure sensor kit, part number(###) ###-####i am looking

Customer Question

fuel pressure sensor kit, part number(###) ###-####i am looking for wiring diagram for 3 wires. Do you have this avalable?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  cumminsdr replied 1 year ago.
Hello and welcome to Just Answer! I would be more than happy to assist you today.I don't but here is my cheat sheet that works too.Locate the wiring harness from the existing fuel pressure sensor. Attach one label to each of the three wires in the harness connector the connector should be marked ABC if not with the old connector tang pointed to the left B is the top wire C is the middle wire and A is the bottom wire:
Label pin A with an A.
Label pin B with a B.
Label pin C with a C.
Cut off all three wires from the high-pressure sensor connector.
Strip the insulation from each of the three wires.
Located on the electrical repair connector are the correct letters. Match the labeled wires together.
Make sure the electrical repair connector butt and the wire are fully installed before crimping.
A connects to the red-striped wire on the jumper harness.
B connects to the black wire on the jumper harness.
C connects to the green-striped wire on the jumper harness
Expert:  cumminsdr replied 1 year ago.
Hello just following up. Do you need more assistance? Please don't forget to rate my service.
Expert:  cumminsdr replied 1 year ago.
Hello just following up. Do you need more assistance? Please don't forget to rate my service.
Expert:  cumminsdr replied 1 year ago.
Please don't forget to rate my service.

Related Medium and Heavy Trucks Questions