How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2516
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
65057319
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

2009 freight liner ColumbiA doo not start the starter o.my

Customer Question

2009 freight liner ColumbiA doo not start the starter o.my does calc clac
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Customer: replied 1 year ago.
Is an automatic transmission
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Remote Tech Support. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  spankyjr1 replied 1 year ago.
Hi, my name is ***** ***** you for your question.
Are you getting fast clicking sound by starter?
Let me know
Customer: replied 1 year ago.
No
Expert:  spankyjr1 replied 1 year ago.
Please explain what its doing,,, is it one click around starter when you try to crank engine?
If not please let me know what its doing?
Thanks
Customer: replied 1 year ago.
The transmission screen yshows 88and
Customer: replied 1 year ago.
Yes only one sound every time I turn. The key to start
Customer: replied 1 year ago.
It is 2009 automatic. Transmission. Cat. Engine c 15
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Video Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  spankyjr1 replied 1 year ago.
You have to give me time to type if this does not work let me know and I will contact you with a phone call offer.
When the trans screen shows 88 that means it did not power up correctly.
Disconnect and clean all battery connections.
Check any fuse holders in battery box for corrosion and pin socket tension,, they can get week and not make good enough contact.
Any eyelet connections at batteries pull on wires to make sure they do not come apart.
After you re connect battery turn key on for a couple seconds and turn off,,,then turn key on if okay go no further,,,if not okay cycle key 6 times within 5 seconds,,turn key off 2 minutes and power up again.
This would clear any not active codes.
If that does not fix try pulling codes,, turn key on,, cycle key 4 times within 5 seconds and read codes.
Let me know if you get any codes or issue is not fixed.
Thanks in advance for leaving a positive rating. If you happen to need more help, this question will stay open for weeks.
spanky
Customer: replied 1 year ago.
It. Shows code pid283
Expert:  spankyjr1 replied 1 year ago.
That is only part of the code,, you need to scroll down to get the rest of the numbers.
Also you need to do other things I typed up first before getting codes.
Disconnect and clean all battery connections.
Check any fuse holders in battery box for corrosion and pin socket tension,, they can get week and not make good enough contact.
Any eyelet connections at batteries pull on wires to make sure they do not come apart.
You can't skip this step.
A loose or poor connection may fix the issue,, so no further diagnosing needs to be done.
Thanks

Related Medium and Heavy Trucks Questions