How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1732
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

There. Need some help. I have a 97 FL70 with a chewed

Customer Question

Hi there. Need some help. I have a 97 FL70 with a chewed up wiring harness. I have not been able to locate a wiring harness for that model but I have found a harness from a 2003 FL70. I was just going to strip the wires from the 03 harness and use them to replace the bad ones in my 97 harness. My question is will that work? Also need 03 wiring diagram.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 1 year ago.
They are very similar harnesses. Are the engines the same? Can I get the full VIN on the 2003 so I can load up the electrical manual for you? Which harness are you replacing? Engine, dash, cab? If engine, I'll need the engine info as well since the harness is specific to them.

Related Medium and Heavy Trucks Questions