Engine #79294274. Family 8cexh0912xal......
model isx500 st
ref no. 21180088
not I just see 382. but also have this mechanical fault
MID 128 SID 27, FMI 7
value too hight
MID 128 PID 131 FMI 0.
ANY IDEA ON THIS OTHER FAULTS
ok let me look
ok This fault code will set when the actual VGT actuator position can not meet the commanded position for more than 10 seconds.Either the actuator on the turbo has failed or the turbo sector gear is binding and you need a new turbo
Exhaust Gas Pressure Sensor Circuit - Voltage Above Normal, or Shorted to High Source. High signal voltage detected at the exhaust gas pressure circuit.
None on performance
VGT Actuator Driver Circuit (Motor) - Mechanical System Not Responding Properly or Out of Adjustment. The smart VGT controller has detected incorrect stop limits, or the VGT is unable to move to the closed position.
VGT travel may be limited.