How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag
rpmdiag, Tech and Instructor
Category: Mazda
Satisfied Customers: 7202
Experience:  Since 1975
12769047
Type Your Mazda Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

My AT light on my 2005 mazda 6 keeps coming on and it gets

Customer Question

My AT light on my 2005 mazda 6 keeps coming on and it gets stuck in 3rd gear, won't drive normal until I cut the car on and off numerous times. I also replaced the tcm already
Submitted: 2 months ago.
Category: Mazda
Customer: replied 2 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  rpmdiag replied 2 months ago.

Hi, I'm Ron and I will be helping you today.
Stand by for a moment while I prepare your answer.

Expert:  rpmdiag replied 2 months ago.

Here’s the sequence of events I follow:
Check fluid level and color. Make appropriate repairs.
Check shift solenoids with a scan tool in bidirectional mode if
applicable. Shift solenoids are inside the transmission and this is
the easiest way to check them.
Drop pan and inspect for excessive metal shavings inside pan.
Check valve body and clutches visually.
Hopefully you may not have to go this far, maybe you just were a
bit low on fluid.
Thanks, Ron

Expert:  rpmdiag replied 2 months ago.

If you are satisfied with my answer, I would greatly appreciate a 5
star rating now and I will still assist you after you have rated me
too if another question pops up. I don’t get credit for helping you
until you rate me.
Thanks again, Ron