How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Mazda
Satisfied Customers: 22139
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Mazda Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Can the accuater that seems by picture to be in the wrong

Customer Question

can the accuater that seems by picture to be in the wrong position, can it be indexed on the 2004 mazda6 3.0
Submitted: 4 months ago.
Category: Mazda
Expert:  Ron replied 4 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 4 months ago.

Which picture and what actuator are you referring to?

Customer: replied 4 months ago.
bank 2 intake cam accuator
Expert:  Ron replied 4 months ago.

What type of problem are you having?

Customer: replied 4 months ago.
the picture on google search of our engine shows our accuator to be 180 out. can we rotate it?
Expert:  Ron replied 4 months ago.

I am not seeing a picture, would you like the install steps for the actuator?

Customer: replied 4 months ago.
its not the steps we need , hopefully we got that , all we need to know is if the accuator can be rotated. it obviously had been rebuilt by some one and we think it was installed improperly.
Expert:  Ron replied 4 months ago.

Im not sure what you needing so I will open the post back up for you.

Customer: replied 4 months ago.
the accuator on the cam gear appears to be 180 out , can we rotate the accuator
Expert:  sprinkles08 replied 4 months ago.

Hello and welcome to JustAnswer!

Without some context it looks as if you're trying to install timing components and the cam simply needs to be turned. If it's a cam phaser you're referring to it should only mount to the cam in one way.

What specifically are you trying to repair?