How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag
rpmdiag, Tech and Instructor
Category: Mazda
Satisfied Customers: 7627
Experience:  Since 1975
12769047
Type Your Mazda Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

Have a 1994 Mazda 2300 Pickup Truck that dies going down the

Customer Question

Have a 1994 Mazda B 2300 Pickup Truck that dies going down the road. Just like you turn off the key.
Submitted: 10 months ago.
Category: Mazda
Expert:  rpmdiag replied 10 months ago.

Hi, welcome to Just Answer. I’m Ron and I’ll be helping you
today.
Before we get started though, Please understand that I don't know
your skill level or tools you have to assist us. Also understand that
I can't see, smell, hear, or touch the vehicle either, so patience is
appreciated. JA is a great Q/A site, but it does NOT replace a
repair shop.
My goal is to make you happy and get a great rating in return for
my time. Sometimes I have to give you bad news that I know you
didn’t want to hear, so please don’t shoot the messenger.

The ignition module may be failing or the fuel pump can have a flat spot on the armature.

When it happens again be prepared to check spark at the plugs with a spark tester and check fuel pressure with a gauge. We need to isolate which one is missing.

Thanks, Ron

Customer: replied 10 months ago.
Where is the ignition module located ?
Expert:  rpmdiag replied 10 months ago.

It's inside the distributor along with the crank angle sensor. You just replace the complete distributor if it's bad.

Thanks again, and please remember to rate me 5 stars and keep this link in case you need me again later on.

Ron

Expert:  rpmdiag replied 10 months ago.

I'm following up to see if you have any more questions.

Thanks, Ron