How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Drew Your Own Question
Drew
Drew, Super Mazda Tech.
Category: Mazda
Satisfied Customers: 2188
Experience:  19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.
49548721
Type Your Mazda Question Here...
Drew is online now
A new question is answered every 9 seconds

The Immobilzer was tripped. was going to try unplugging the

Customer Question

Hi The Immobilzer was tripped. was going to try unplugging the pcm to see if that would do a reset.
JA: What is the model/year of your Mazda?
Customer: 2010 6
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: tried the actual key instead of push button. However the key or ignition has been changed as key does not work. Wont even go in the switch
JA: Any trouble turning the key in the ignition? Do you have a key fob?
Customer: Have the fob
JA: Anything else you think the mechanic should know?
Customer: It looks like a bunch of aftermarket add on have been installed
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mazda Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Mazda
Expert:  Wayne Crawford replied 5 months ago.

Hello. My name is ***** ***** I will be helping you today.

Do you have a passthrough cable to reprogram it?

Related Mazda Questions