How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, ASE Certified Technician
Category: Mazda
Satisfied Customers: 1346
Experience:  Dealer Auto Technician
94707146
Type Your Mazda Question Here...
Dan is online now
A new question is answered every 9 seconds

I have 2004 mazda 6 the 3.0 engine an im having trouble with

Customer Question

i have 2004 mazda 6 the 3.0 engine an im having trouble with it it keeps pooping this codes p2107 ,p2100, p2110 the problem with the car it wont accelerate.
JA: Let's get those codes to the mechanic so you two can figure this issue out ASAP. How many miles are on the car?
Customer: 150xxx
JA: What is the model of your '04 Mazda?
Customer: 2004 mazda 6
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes hoping to get it done my self im just curiose to wat the codes or
JA: Anything else you think the mechanic should know?
Customer: thats just the problem
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mazda Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Mazda
Expert:  Dan replied 5 months ago.

Hello my name is ***** ***** to help you today.

Those codes are all related to the throttle body actuator. I would check the wiring harness near the throttle body for any broken wires. Because you have 3 codes you should try clearing them and see which one comes back first. Before replacing any expensive parts. Carefully check the wiring harness.

Expert:  Dan replied 5 months ago.

P2100 Throttle actuator control motor circuit/open ON 1 CCM (See DTC P2100 [AJ]
P2101 Throttle actuator control motor circuit range/performance ON 1 CCM (DTC P2101 [AJ]
P2105 Throttle actuator control system - forced engine shutdown OFF 1 Other (DTC P2105 [AJ]
P2107 Throttle actuator control module processor ON 1 CCM (See DTC P2107 [AJ]
P2108 Throttle actuator control module performance ON 1 or 2 CCM (MIGHT ONLY BE 6i, 2.3)

P2110 Throttle actuator control system - forced limited RPM ON 1 CCM (See DTC P2110 [AJ]
P2111 Throttle actuator control system - stuck open ON 1 CCM (See DTC P2111, P2112 [AJ]
P2112 Throttle actuator control system - stuck close ON 1 CCM (See DTC P2111, P2112 [AJ]
P2119 Throttle actuator control throttle body range/performance ON 2 CCM (DTC P2119 [AJ]

Expert:  Dan replied 5 months ago.

Is there anything else I can help you with?

Related Mazda Questions