How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john aka eauto Your Own Question
john aka eauto
john aka eauto, The Car Guy
Category: Mazda
Satisfied Customers: 15070
Experience:  ase tech,shop owner
6149662
Type Your Mazda Question Here...
john aka eauto is online now
A new question is answered every 9 seconds

I just installed a new motor with 30,000 miles on it... I am

Customer Question

I just installed a new motor with 30,000 miles on it... I am getting a code p0011 and p0016... i have no power and it idles really low and rough....
JA: The mechanics have tons of experience in that area. Are those all of the "symptoms"?
Customer: yes
JA: Anything else I can tell the Mazda Mechanic before I connect you two?
Customer: thats it
JA: Got it. Let's get this figured out. I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Mazda Mechanic about your situation and connect you two. You'll be on the road in no time.
Submitted: 8 months ago.
Category: Mazda
Expert:  john aka eauto replied 8 months ago.
year model and motor size?
Customer: replied 8 months ago.
2007 mazda 6 2.3 motor
Expert:  john aka eauto replied 8 months ago.
have you replaced the vvt actuators?
Customer: replied 8 months ago.
I replace the cam sensor on the right side of the valve cover is all
Expert:  john aka eauto replied 8 months ago.
attached are the test charts
Customer: replied 8 months ago.
are you talking about the sensor on the left of the valve cover???? as the vvt solenoid
Expert:  john aka eauto replied 8 months ago.
#9 in the picture... if everything is plugged in I don't see how this is a30 k motor
Customer: replied 8 months ago.
that dosnt show the sensor im talking about and i dont understand what you are telling me.... i already have all the test procedures and digrams
Expert:  john aka eauto replied 8 months ago.
the vvt is on the end of the cam shaft its the actuator that advance and retards timing
Expert:  john aka eauto replied 8 months ago.
is the timing chain loose?

Related Mazda Questions