How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joe Prestia Your Own Question
Joe Prestia
Joe Prestia,
Category: Mazda
Satisfied Customers: 31
Experience:  Lead Automotive Tech at Belle Tire
92135077
Type Your Mazda Question Here...
Joe Prestia is online now
A new question is answered every 9 seconds

2014 mazda 3 blind spot sensor lh rear in crash no visable

Customer Question

2014 mazda 3 blind spot sensor lh rear in crash no visable damage yet lite on in dash. what do I have to do to clear system and make work ?
Submitted: 9 months ago.
Category: Mazda
Expert:  Joe Prestia replied 9 months ago.

Does the light flash or is it steadily on?

Customer: replied 9 months ago.
With the system turned off it stays on steady. with the system turned on (activated) it flashes. It also flashes when I unplug the sensor weather the system is turned on or off.
Thank's
Expert:  Joe Prestia replied 9 months ago.

There is a technical service bulletin about problems with those. It says something about reprogramming bsm modules and re-aiming the sensors. You should contact the dealer for further assistance! Good luck!