How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Drew Your Own Question
Drew
Drew, Super Mazda Tech.
Category: Mazda
Satisfied Customers: 2188
Experience:  19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.
49548721
Type Your Mazda Question Here...
Drew is online now
A new question is answered every 9 seconds

2006 mazda 3 sp23 Vehicle came in /sinking brake pedal, no

Customer Question

2006 mazda 3 sp23
Vehicle came in for low/sinking brake pedal, no leaks, no codes, got abs actuated at quick stop working normally, pedal returned then after a few stops became soft again. Replaced master with oem unit, pedal was stiff again after a few pumps with it on the lift rack all wheels' brakes locked up. inspection of calipers are good and all wheel pads at over 80%. after bleeding system again (no air came out) doing same. if we crack the lines at the master cylinder the wheels front and rear release. the vehicle in not equipped with a strut sway bar, as previous same issue with other technicians determined it needed adjustment to correct problem. replaced master with another master to be sure of faulty part. again bleed system with no air releasing. with car off, brake pedal after approx 6 pumps locks up wheels untill master lines are cracked to relive pressure. does this if car is running or not. please help!
Submitted: 1 year ago.
Category: Mazda
Expert:  350matt replied 1 year ago.

Hi

do all 4 wheels lock up or is it just 1 corner?